Journal Information
About This Journal
Mochammad Fahlevi
Bina Nusantara University | Indonesia
Analysis of labor productivity in the installation of walls with lightweight bricks in the construction project of Sudamala Resort Ubud
Abstract
Labor productivity is an important indicator for controlling time, cost, and quality in construction projects. The installation of lightweight brick walls requires a high level of efficiency; however, in practice, there is often a discrepancy between the actual productivity in the field and applicable standards. This study aims to analyze labor productivity in lightweight brick wall installation work and compare it with the standards set out in Regulation of the Minister of Public Works and Public Housing (Permen PUPR) Number 01 of 2022. The study was conducted on the Sudamala Resort Ubud construction project using direct observation and a work sampling approach. Observations were made for 14 working days during normal working hours to obtain data on the number of workers, effective working time, and volume of work produced. The data were analyzed to determine the productivity value and coefficient of workers, which consisted of foremen, master craftsmen, craftsmen, and laborers. The results of the study show that the average productivity of workers in the field is 18.175 m²/day for foremen, 19.123 m²/day for master craftsmen, and 18.546 m²/day for craftsmen and workers, with productivity coefficients of 0.055, 0.041, and 0.239, respectively. Compared to the standard of Permen PUPR 01 of 2022, there are differences in productivity values and coefficients in each labor category. These differences are influenced by the field conditions, workforce composition, and work implementation methods.
References
Cahyadi, H., Purnamasari, E., & Nordiansyah, M. (2021). Perhitungan Produktivitas Pekerjaan Pemasangan Dinding Bata Ringan dengan Metode Time Study pada Proyek Pembangunan Ruang Kantor Sekolah Menengah Atas Negeri 5 Banjarmasin. Seminar Nasional Inovasi Teknologi Terapan (SNITT) 2021, 37–43. https://jurnal.poltekba.ac.id/index.php/prosiding/article/view/1342%0Ahttps://jurnal.poltekba.a c.id/index.php/prosiding/article/download/1342/768
Maulana, R., & Saleh, R. (2024). Perbandingan Biaya Pekerjaan Dinding antara Bata Ringan dengan Sistem Pracetak pada Bangunan Rumah. Journal of Engineering Education and Pedagogy, 2(1), 8–15. https://doi.org/10.56855/jeep.v2i1.700
Muntaha, P. A., Herwanto, D., Asyidikiah, M. R., & Karawang, S. (2022). STRING (Satuan Tulisan Riset dan Inovasi Teknologi) ANALISIS PRODUKTIVITAS PEKERJA MENGGUNAKAN METODE WORK SAMPLING DI TOKO XYZ. 6(3), 325–332.
Pratiwi, S. A., & Pudyastuti, P. S. (2023). Pengawasan Dan Pengendalian Mutu Beton Pada Pelaksanaan Pembangunan Bendungan Jlantah. Prosiding Seminar Nasional Teknik Sipil, 50–57.
Putra, I. K. A. A., Pagehgiri, J., & Ariyanta, I. P. G. (2021). Analisis Kinerja Konsultan Pengawas Konstruksi Dalam Pelaksanaan Proyek Gedung Puskesmas di Kabupaten Tabanan. Jurnal Teknik Gradien, 13(1), 48–60. https://doi.org/10.47329/teknikgradien.v13i1.741
Putri, T. A. T. H., Cahyadi, H., & Rachman, T. A. (2023). Analisis Produktivitas Pekerja Dalam Pekerjaan Pemasangan Bata Ringan Pada Proyek Pembangunan Gedung Serbaguna Polres Dan Rehabilitasi Ruang Kapolres Kota Banjarbaru. 1, 47–54.
Saputro, D., & Riyanto, S. (2021). Analisa Manajemen Risiko Pada Pelaksanaan Pembangunan Proyek Konstruksi Khususnya Bangunan Bertingkat Tinggi di Kota Semarang. 16.
Suryadi Putra, T. (2020). Analisis Koefisien Produktivitas Tenaga Kerja Pada Pekejaan Pasangan Dinding dengan Bata Ringan (Comparative Analysis of Labour’S Productivity on Lightweight Brick). 1–63.
Syahputra, M. A. (2023). Rancang Bangun Monitoring Keamanan dan Berat Muatan pada Truk Berbasis IoT.